Cut Flower Storage
For pre-cooled roses, carnations, chrysanthemums and lilies.
Uniform temperature · High RH · Gentle airflow
Commercial Flower Cold Storage
Flower Cold Rooms Built Around Your Product Load
We design modular storage, pre-cooling and multi-zone rooms for growers, 도매업자, exporters and contractors. Every proposal starts with product and operating data—not room volume alone.
- Species-based conditions
- High-humidity coordination
0-2°CMany non-tropical cut flowers*
8–13°CMany cold-sensitive tropical flowers*
90–95% RHCommon temperate cut-flower target*
75–100 mmTypical positive-temperature PU/PIR panels
Choose by process
Match the room to the flower and the cooling task.
*Final temperature, RH and holding time depend on species, cultivar, packaging and storage duration.
Flower Pre-Cooling
Removes field heat before packing or shipment.
kg/day · Entry temperature · Pull-down timeTropical Flower Room
For orchids, anthuriums and similar flowers.
Chilling protection · Crop separationMulti-Zone Flower Hub
Independent receiving, cooling and dispatch zones.
Compatibility · Workflow · ExpansionRecommended Storage Conditions for Common Flowers
Proper storage extends vase life, maintains quality and reduces postharvest losses.
| 꽃의 종류 | 온도 (°C) | RH (상대 습도) | 노트 |
|---|---|---|---|
| 장미 | 1–4°C | 85–95% | Store dry. Use fresh-cut flower food after conditioning. |
| 카네이션 | 0-2°C | 80-90% | Store dry. Sensitive to ethylene—keep away from ripening produce. |
| 국화 | 1-3°C | 85–95% | Store dry. Ensure good air circulation to prevent Botrytis. |
| 백합 | 2–4°C | 80-90% | Store dry. Some varieties are ethylene sensitive. |
| 난초 | 13-15°C | 70–80% | Store in well-ventilated conditions. Avoid temperatures below 10°C. |
| Tropical Flowers | 10–13°C | 75-85% | Store dry. Sensitive to chilling—avoid temperatures below 10°C. |
Best Practices
- Pre-cool flowers before storage
- Maintain consistent temperature
- Ensure proper airflow
- Monitor and calibrate equipment regularly
메모: Conditions may vary by variety and maturity stage. Follow specific grower recommendations when available.
What serious B2B projects must address
The thermostat tells only part of the story.
Holding vs. pull-down load
Holding at 2°C differs greatly from cooling 2,000 kg from 18°C to 2°C in six hours.
Humidity as a system
Coil temperature, 팬, 포장, doors and defrost affect RH. A humidifier cannot correct poor design.
Airflow and rack clearance
Direct air increases moisture loss; weak circulation creates hot spots. Both need engineered airflow paths.
Net usable capacity
We calculate carts, boxes or pallets after allowing for aisles, doors and airflow space.
Performance definition
Controller accuracy does not equal room uniformity. Define sensors, alarms and commissioning checks.
Climate and failure risk
For up to 45°C design ambient, review condenser duty, 보호, alarms and standby capacity.
Heat-load based selection
Turn operating data into an installation-ready solution.
We combine transmission, pull-down, 침투, internal and ambient loads to define capacity, evaporator duty and controls.
Design Input MapILLUSTRATIVE DATA
방길이 × 폭 × 높이, 패널, 바닥
제품species, kg/day, 포장
온도entry, target, pull-down hours
Siteambient, 문, 전압, 시간
↓
2,000 kg/day · 18°C → 2°C · 6 hExample only. Final capacity follows the complete project heat-load calculation.
CAPACITY
AIRFLOW
CONTROLS
Flower Cold Room Internal Layout Example
Wall Panel
기류
Monitoring Point
배수
문
증발기
RacksFlower BoxesFlower BoxesFlower BoxesFlower BoxesFlower BoxesFlower BoxesBuckets
LOADING
AISLE
AISLE
RacksFlower BoxesFlower BoxesFlower BoxesFlower BoxesFlower BoxesFlower BoxesBuckets
Final aisle, evaporator and sensor positions follow cart dimensions, door cycles and loading method.
Refrigeration architecture
Select the package that matches your project team.
모노블럭 유닛
Standardized package with minimal site refrigeration work.
- 다음에 가장 적합
- 도매업자
- 현장 작업
- 낮은
- Expansion
- 제한된
Split System
Flexible equipment placement for most commercial projects.
- 다음에 가장 적합
- 계약자
- 현장 작업
- 중간
- 유연성
- 높은
콘덴싱 유닛 + 증발기
Component-based design for high loads and expansion.
- 다음에 가장 적합
- Engineering firms
- 현장 작업
- 높은
- Expansion
- 강한
Contractor-ready supplyMarked parts, coordinated drawings and remote technical support
Clear export scope
Know what arrives—and what the site team completes.
Each quotation separates factory supply from local work to prevent missing or duplicated items.
Enclosure패널, 문, trims and hardware
냉각단위, 증발기, controls and accessories
선적 서류 비치Layout, BOM and installation guidance
Site ScopeFoundation, lifting, 관, wiring and commissioning
Buyer questions
Flower Cold Room FAQ
1. What temperature should a flower cold room maintain?
Many non-tropical flowers use 0–2°C; cold-sensitive tropical varieties often need 8–13°C.
2. What relative humidity do flowers require?
Many temperate cut flowers use 90–95% RH; species, packaging and holding time change the target.
3. Can different flowers share one room?
Combine only crops with compatible temperature, RH, chilling and ethylene requirements.
4. Do I need holding storage or pre-cooling?
Pre-cool warm incoming flowers; use holding rooms for already-cooled products.
5. How do you calculate refrigeration capacity?
We calculate transmission, 제품, 침투, internal and ambient loads—not volume alone.
6. Will airflow dehydrate the flowers?
Correct evaporator position, air throw and rack clearance limit direct drying.
7. Does every room need a humidifier?
아니요. Coil design, 포장, door activity and climate determine the need.
8. Can the system handle hot climates or unstable power?
High-ambient condensers, voltage protection, alarms and standby capacity address these risks.
9. What does the package include?
The final BOM identifies panels, 냉동 장비, 통제 수단, accessories and drawings.
10. What information do you need for a quotation?
Send dimensions, flower list, 포장, kg/day, entry and target temperatures, 풀다운 시간, door activity, location and power supply.
Start with operating data
Get a Flower Cold Room Proposal Your Team Can Use.
Send a sketch and operating details. Our engineers will confirm missing data and recommend the system scope.
- 객실 크기
- Flower varieties
- Daily load
- Entry temperature
- Target conditions
- 프로젝트 위치