Cut Flower Storage
For pre-cooled roses, carnations, chrysanthemums and lilies.
Uniform temperature · High RH · Gentle airflow
Commercial Flower Cold Storage
Flower Cold Rooms Built Around Your Product Load
We design modular storage, pre-cooling and multi-zone rooms for growers, تجار الجملة, exporters and contractors. Every proposal starts with product and operating data—not room volume alone.
- Species-based conditions
- High-humidity coordination
0-2 درجة مئويةMany non-tropical cut flowers*
8–13°CMany cold-sensitive tropical flowers*
90–95% RHCommon temperate cut-flower target*
75–100 mmTypical positive-temperature PU/PIR panels
Choose by process
Match the room to the flower and the cooling task.
*Final temperature, RH and holding time depend on species, cultivar, packaging and storage duration.
Flower Pre-Cooling
Removes field heat before packing or shipment.
kg/day · Entry temperature · Pull-down timeTropical Flower Room
For orchids, anthuriums and similar flowers.
Chilling protection · Crop separationMulti-Zone Flower Hub
Independent receiving, cooling and dispatch zones.
Compatibility · Workflow · ExpansionWhat serious B2B projects must address
The thermostat tells only part of the story.
Holding vs. pull-down load
Holding at 2°C differs greatly from cooling 2,000 kg from 18°C to 2°C in six hours.
Humidity as a system
Coil temperature, المشجعين, التعبئة والتغليف, doors and defrost affect RH. A humidifier cannot correct poor design.
Airflow and rack clearance
Direct air increases moisture loss; weak circulation creates hot spots. Both need engineered airflow paths.
Net usable capacity
We calculate carts, boxes or pallets after allowing for aisles, doors and airflow space.
Performance definition
Controller accuracy does not equal room uniformity. Define sensors, alarms and commissioning checks.
Climate and failure risk
For up to 45°C design ambient, review condenser duty, حماية, alarms and standby capacity.
Heat-load based selection
Turn operating data into an installation-ready solution.
We combine transmission, pull-down, تسلل, internal and ambient loads to define capacity, evaporator duty and controls.
Design Input MapILLUSTRATIVE DATA
غرفةالطول × العرض × الارتفاع, لوحة, أرضية
منتجspecies, kg/day, التعبئة والتغليف
درجة حرارةentry, target, pull-down hours
Siteambient, أبواب, الجهد االكهربى, ساعات
↓
2,000 kg/day · 18°C → 2°C · 6 hExample only. Final capacity follows the complete project heat-load calculation.
CAPACITY
AIRFLOW
CONTROLS
Flower Cold Room Airflow ConceptKeep supply and return paths clear at full operating load.
LOW-DRAFT EVAPORATOR
SUPPLY AIR→ → → →
↓ ↓ ↓ ↓
RACK A
CLEAR AISLE
RACK B
CLEAR AISLE
RACK C
← ← ← ←RETURN AIR
Supply airCross-rack flowFloor return
Refrigeration architecture
Select the package that matches your project team.
وحدة أحادية الكتلة
Standardized package with minimal site refrigeration work.
- الأفضل ل
- تجار الجملة
- عمل الموقع
- قليل
- Expansion
- محدود
Split System
Flexible equipment placement for most commercial projects.
- الأفضل ل
- المقاولون
- عمل الموقع
- واسطة
- المرونة
- عالي
وحدة التكثيف + المبخر
Component-based design for high loads and expansion.
- الأفضل ل
- Engineering firms
- عمل الموقع
- عالي
- Expansion
- قوي
Contractor-ready supplyMarked parts, coordinated drawings and remote technical support
Clear export scope
Know what arrives—and what the site team completes.
Each quotation separates factory supply from local work to prevent missing or duplicated items.
Enclosureلوحات, أبواب, trims and hardware
تبريدوحدة, المبخر, controls and accessories
توثيقLayout, BOM and installation guidance
Site ScopeFoundation, lifting, الأنابيب, wiring and commissioning
Buyer questions
Flower Cold Room FAQ
1. What temperature should a flower cold room maintain?
Many non-tropical flowers use 0–2°C; cold-sensitive tropical varieties often need 8–13°C.
2. What relative humidity do flowers require?
Many temperate cut flowers use 90–95% RH; species, packaging and holding time change the target.
3. Can different flowers share one room?
Combine only crops with compatible temperature, ر, chilling and ethylene requirements.
4. Do I need holding storage or pre-cooling?
Pre-cool warm incoming flowers; use holding rooms for already-cooled products.
5. How do you calculate refrigeration capacity?
We calculate transmission, منتج, تسلل, internal and ambient loads—not volume alone.
6. Will airflow dehydrate the flowers?
Correct evaporator position, air throw and rack clearance limit direct drying.
7. Does every room need a humidifier?
لا. Coil design, التعبئة والتغليف, door activity and climate determine the need.
8. Can the system handle hot climates or unstable power?
High-ambient condensers, voltage protection, alarms and standby capacity address these risks.
9. What does the package include?
The final BOM identifies panels, معدات التبريد, الضوابط, accessories and drawings.
10. What information do you need for a quotation?
Send dimensions, flower list, التعبئة والتغليف, kg/day, entry and target temperatures, وقت المنسدلة, door activity, location and power supply.
Start with operating data
Get a Flower Cold Room Proposal Your Team Can Use.
Send a sketch and operating details. Our engineers will confirm missing data and recommend the system scope.
- أبعاد الغرفة
- Flower varieties
- Daily load
- Entry temperature
- Target conditions
- موقع المشروع