China Air Conditioning And Coolroom Refrigeration Accessories

ವಿವರಣೆ

Common Refrigeration Accessories

Copper Pipe

We fabricate copper pipe with 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1 inch, or customize your size.

Electronic Expansion Valve

ಎಲೆಕ್ಟ್ರಾನಿಕ್ ವಿಸ್ತರಣೆ ಕವಾಟ (EEV) is a critical component in ಶೈತ್ಯೀಕರಣ ಮತ್ತು ಹವಾನಿಯಂತ್ರಣ ವ್ಯವಸ್ಥೆಗಳು, responsible for regulating the flow of refrigerant into the evaporator.

ಕಾರ್ಯ:

-Optimize Superheat

-Improve System Performance

-Precise Refrigerant Flow Control

-Response to Changing Condition

-Prevent flooding (too much refrigerant) and starvation (too little refrigerant)

TXV (ಉಷ್ಣ ವಿಸ್ತರಣೆ ಕವಾಟ)

We have Danfoss/Sanhua/DunAn/Emerson/Parker, etc TXV with top level quality and competitive price.

ಸಂಕೋಚಕ

We supply Copeland/Bitzer/Dorin/Panasonic/Sanyo/Highly/GMCC compressor with different models.

Solenoid Valve

Solenoid valve is an electromechanical device used to control the flow of liquid or gas. It consists of a solenoid, which is a wire coil, and a movable plunger or valve that is typically made of ferrous material. When an electrical current is applied to the solenoid, it generates a magnetic field that moves the plunger, either opening or closing the valve.

ಕಾರ್ಯಗಳು:

-Flow Control

Solenoid valve can control the flow of liquids or gases in a system. They can either allow or block the passage of the substance by open or closing the valve.

-On/Off Operation

Solenoid valves act as on/off switches for fluid or gas flow. When the solenoid is energized, the valve opens, allowing flow. When de-energized, the valve closes, stopping the flow.

-Remote Operation

Solenoid valves can operate remotely by electrical signal. This feature is beneficial for automation and control systems, allowing for efficient and precise management of fluid or gas flow.

-Quick Response

Solenoid valves have a rapid response time, making them suitable for applications where quick and accurate control of fluid flow is essential.

Low/High Pressure Gauge

Fucntion:

-Measure Condenser Pressure

-Condenser Performance Indication

-Monitor System Load

-Overheating Identification

-Safety Monitor

Liquid Receiver

Liquid receiver is a component for refrigeration and ಹವಾನಿಯಂತ್ರಣ systems to store and regulate the flow of liquid refrigerant.

ಕಾರ್ಯ:

-Storage of Liquid Refrigerant

-Regulation of Refrigerant Flow

-Prevention of Liquid Slugging

-Separate Liquid and Vapor

-Facilitate System Maintenance

-Stabilize Temperature

-Equalize Pressure

ದೃಷ್ಟಿ ಗಾಜು

Sight glass, also known as sight window or sight port, is a transparent or translucent window typically installed in a pipeline or vessel in various industrial applications.

ಕಾರ್ಯ:

-ದೃಶ್ಯ ತಪಾಸಣೆ

-Identification of Fluid Phase

-Level Monitor

-Detection of Bubble or Impurity

-Verification of Flow

-Temperature and Color Observation

-Safety Monitor

-Process Optimization

Low/High Pressure Controller

Fucntion:

-Monitor Condenser Pressure

-Pressure Limitation

-Compressor Protection

– Safety Devices Activation

-Alarm and Shutdown

ಫಿಲ್ಟರ್ ಡ್ರೈಯರ್

Filter dryer is a component used in ಶೈತ್ಯೀಕರಣ and air conditioning systems to remove moisture, contaminants, and particles from the refrigerant.

ಕಾರ್ಯ:

-Moisture Removal

-Contaminant Filtration

-Acid Removal

-Protection for Compressor

-Prevention of Icing

-Maintaining System Efficiency

-Extended System Life

ಅನಿಲ-ದ್ರವ ವಿಭಜಕ

Gas-liquid separator is a device used in various industrial applications to separate a mixture of gas and liquid phases.

ಕಾರ್ಯ:

-Phase Separation

-Removal of Liquid Droplet

-Protection of Downstream Equipment

-Prevention of Carryover

-Improvement of Gas Quality

-Enhancement of System Efficiency

Axial Fan Motor and Grill

Actually this accessory included 3 separate parts: ಅಭಿಮಾನಿ, ಮೋಟಾರ್, and grille, they are integrated into an entirety to blow out strong wind cooling the room temperature quickly.

ಕಾರ್ಯ:

-Blow Strong Wind

-Improved Heat Exchange

-Stabilize the Whole Refrigeration System

ತೈಲ ವಿಭಜಕ

Also known as oil separator tank or oil trap, is a component used to separate and remove oil from the refrigerant.

ಕಾರ್ಯ:

-Oil Removal

-Prevention of Oil Carryover

-Protection of Components

-Improved Heat Exchange

-Enhanced Compressor Efficiency

ಶಾಖ ವಿನಿಮಯಕಾರಕ

We can tailor the heat exchanger size, ಅಲ್ಯೂಮಿನಿಯಂ ರೆಕ್ಕೆಗಳು’ size and color, copper coil shape and diameter according to your drawing and unique demand !